Skip to content
English
Sign in
  • There are no suggestions because the search field is empty.

Checking the micro fuse

This section describes how to check the micro fuse on the H600.

DANGER!

Danger resulting from incorrect commissioning

⇒ Commissioning must be performed only by persons with technical and electrotechnical training who were also authorized by fruitcore robotics!

 

  1. Switch off the robot and de-energize the system. Disconnect the Harting plug.
    close HorstFX
  2. Use a flat-blade screwdriver to unscrew the micro fuse to be tested.



  3. Check the micro fuse using a multimeter.
  4. Reinsert the microfuses after checking them. Incorrect insertion may result in error messages.